H3C S3100 8C SI User Manual

Operation Manual – HWPing
H3C S3100 Series Ethernet Switches Chapter 1 HWPing Configuration
1-30
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
Jitter result:
RTT Number:100
Min Positive SD:1 Min Positive DS:1
Max Positive SD:6 Max Positive DS:8
Positive SD Number:38 Positive DS Number:25
Positive SD Sum:85 Positive DS Sum:42
Positive SD average:2 Positive DS average:1
Positive SD Square Sum:267 Positive DS Square Sum:162
Min Negative SD:1 Min Negative DS:1
Max Negative SD:6 Max Negative DS:8
Negative SD Number:30 Negative DS Number:24
Negative SD Sum:64 Negative DS Sum: 41
Negative SD average:2 Negative DS average:1
Negative SD Square Sum:200 Negative DS Square Sum:161
SD lost packets number:0 DS lost packet number:0
Unknown result lost packet number:0
[Sysname-hwping-administrator-Jitter] display hwping history administrator
Jitter
HWPing entry(admin administrator, tag Jitter) history record:
Index Response Status LastRC Time
1 274 1 0 2000-04-02 08:14:58.2
2 278 1 0 2000-04-02 08:14:57.9
3 280 1 0 2000-04-02 08:14:57.6
4 279 1 0 2000-04-02 08:14:57.3
5 280 1 0 2000-04-02 08:14:57.1
6 270 1 0 2000-04-02 08:14:56.8
7 275 1 0 2000-04-02 08:14:56.5
8 263 1 0 2000-04-02 08:14:56.2
9 270 1 0 2000-04-02 08:14:56.0
10 275 1 0 2000-04-02 08:14:55.7
For detailed output description, see the corresponding command manual.
1.3.6 SNMP Test
I. Network requirements
Both the HWPing client and the SNMP Agent are H3C S3100 series Ethernet switches.
Perform HWPing SNMP tests between the two switches to test the time required from

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English