H3C S3100 8C SI User Manual

Operation Manual – QoS-QoS Profile
H3C S3100 Series Ethernet Switches Chapter 2 QoS Profile Configuration
2-4
Operation Command Description
Configure the
mode to apply
a QoS profile
as port-based
qos-profile
port-based
Specify
the
mode to
apply a
QoS
profile
Configure the
mode to apply
a QoS profile
as user-based
undo qos-profile
port-based
Optional
By default, the mode to apply
a QoS profile is user-based.
z If the 802.1x
authentication mode is
MAC address-based, the
mode to apply a QoS
profile must be configured
user-based.
z If the 802.1x
authentication mode is
port-based, the mode to
apply a QoS profile must
be configured as
port-based.
Table 2-4 Apply a QoS profile manually
Operation Command Description
Enter system view
system-view
—
In system view
apply qos-profile
profile-name interface
interface-list
Enter
Ethernet
port view
interface interface-type
interface-number
Apply a
QoS
profile to
specific
ports
In
Etherne
t port
view
Apply a
QoS profile
to the
current port
apply qos-profile
profile-name
Select either of
the operations.
By default, a port
has no QoS
profile applied to
it.
2.2.3 Displaying QoS Profile Configuration
After the above configuration, you can execute the display command in any view to
view the running status of the QoS profile and verify the configuration.
Table 2-5 Display QoS profile configuration
Operation Command Description
Display QoS
profile
configuration
display qos-profile { all | name
profile-name | interface
interface-type interface-number |
user user-name }
Available in any view

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English