H3C S3100 8C SI User Manual

Operation Manual – PoE-PoE Profile
H3C S3100 Series Ethernet Switches Chapter 2 PoE Profile Configuration
2-2
Operation Command Description
In system view
apply poe-profile
profile-name
interface
interface-type
interface-number
[ to interface-type
interface-number ]
Enter
Ethernet
port view
interface
interface-type
interface-number
Apply the
existing
PoE
profile to
the
specified
Ethernet
port
In
Ethernet
port
view
Apply the
existing
PoE
profile to
the port
apply poe-profile
profile-name
Use either approach.
Note the following during the configuration:
1) When the apply poe-profile command is used to apply a PoE profile to a port,
some PoE features in the PoE profile can be applied successfully while some
cannot. PoE profiles are applied to S3100 series Ethernet switches according to
the following rules:
z When the apply poe-profile command is used to apply a PoE profile to a port, the
PoE profile is applied successfully only if one PoE feature in the PoE profile is
applied properly. When the display current-configuration command is used for
query, it is displayed that the PoE profile is applied properly to the port.
z If one or more features in the PoE profile are not applied properly on a port, the
switch will prompt explicitly which PoE features in the PoE profile are not applied
properly on which ports.
z The display current-configuration command can be used to query which PoE
profile is applied to a port. However, the command cannot be used to query which
PoE features in a PoE profiles are applied successfully.
2.3 Displaying PoE Profile Configuration
After the above configuration, execute the display command in any view to see the
running status of the PoE profile and verify the effect of the configuration by checking
the displayed information.

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English