Operation Manual – File System Management
H3C S3100 Series Ethernet Switches Chapter 1 File System Management Configuration
1-1
Chapter 1 File System Management Configuration
1.1 File System Configuration
1.1.1 Introduction to File System
To facilitate management on the switch memory, S3100 series Ethernet switches
provide the file system function, allowing you to access and manage the files and
directories. You can create, remove, copy or delete a file through command lines, and
you can manage files using directories.
1.1.2 File System Configuration Tasks
Table 1-1 Configuration tasks on the file system
Operation Remarks
Directory Operations Optional
File Operations Optional
Flash Memory Operations Optional
Prompt Mode Configuration Optional
Note:
S3100 series Ethernet switches allow you to input a file path and file name in one of the
following ways:
z In universal resource locator (URL) format and starting with “unit1>flash:/”. or
“flash:/” This method is used to specify a file in the current Flash memory. For
example, the URL of a file named text.txt in the root directory of the switch is
unit1>flash:/text.txt or flash:/text.txt.
z Entering the path name or file name directly. This method can be used to specify a
path or a file in the current work directory. For example, to access file text.txt in the
current directory, you can directly input the file name text.txt as the file URL.
1.1.3 Directory Operations
The file system provides directory-related functions, such as:
z Creating/deleting a directory
z Displaying the current work directory, or contents in a specified directory
To Next Page
Loading...
Need help?
General