Operation Manual – Port Security-Port Binding
H3C S3100 Series Ethernet Switches Chapter 1 Port Security Configuration
1-5
1.2 Port Security Configuration Task List
Complete the following tasks to configure port security:
Task Remarks
Enabling Port Security Required
Setting the Maximum Number of MAC Addresses
Allowed on a Port
Optional
Setting the Port Security Mode Required
Configuring the NTK feature
Configuring intrusion protection
Configuring
Port Security
Features
Configuring the Trap feature
Optional
Choose one or more
features as required.
Ignoring the Authorization Information from the
RADIUS Server
Optional
Configuring Security MAC Addresses Optional
1.2.1 Enabling Port Security
I. Configuration Prerequisites
Before enabling port security, you need to disable 802.1x and MAC authentication
globally.
II. Enabling Port Security
Follow these steps to enable port security:
To do... Use the command... Remarks
Enter system view
system-view
—
Enable port security
port-security enable
Required
Disabled by default
To Next Page
Loading...
Need help?
General