Operation Manual – File System Management
H3C S3100 Series Ethernet Switches Chapter 1 File System Management Configuration
1-5
<Sysname> copy flash:/config.cfg flash:/test/1.cfg
Copy unit1>flash:/config.cfg to unit1>flash:/test/1.cfg?[Y/N]:y
..
%Copy file unit1>flash:/config.cfg to unit1>flash:/test/1.cfg...Done.
# Display the file information after the copy operation.
<Sysname> dir /all
Directory of unit1>flash:/
1 (*) -rw- 3579326 Mar 28 2007 10:51:22 s3100.bin
2 (*) -rw- 1235 Apr 03 2000 16:04:52 config.cfg
3 -rwh 151 Apr 03 2000 16:04:55 private-data.txt
4 -rwh 716 Apr 04 2000 17:27:35 hostkey
5 -rwh 572 Apr 04 2000 17:27:41 serverkey
6 -rwh 548 Apr 04 2000 17:30:06 dsakey
7 drw- - Apr 04 2000 23:04:21 test
7239 KB total (3585 KB free)
(*) -with main attribute (b) -with backup attribute
(*b) -with both main and backup attribute
<Sysname> dir unit1>flash:/test/
Directory of unit1>flash:/test/
1 -rw- 1235 Apr 05 2000 01:51:34 test.cfg
2 -rw- 1235 Apr 05 2000 01:56:44 1.cfg
7239 KB total (3585 KB free)
(*) -with main attribute (b) -with backup attribute
(*b) -with both main and backup attribute
1.2 File Attribute Configuration
1.2.1 Introduction to File Attributes
The following three startup files support file attribute configuration:
z App files: An app file is an executable file, with .bin as the extension.
z Configuration files: A configuration file is used to store and restore configuration,
with .cfg as the extension.
z Web files: A Web file is used for Web-based network management, with .web as
the extension.
To Next Page
Loading...
Need help?
General