H3C S3100 8C SI User Manual

Operation Manual – AAA
H3C S3100 Series Ethernet Switches Chapter 2 AAA Configuration
2-11
 Note:
You can use the display connection command to view the connections of Telnet
users, but you cannot use the cut connection command to cut down their connections.
2.2 RADIUS Configuration Task List
H3C’s Ethernet switches can function not only as RADIUS clients but also as local
RADIUS servers.
Table 2-9 RADIUS configuration tasks (the switch functions as a RADIUS client)
Task Remarks
Creating a RADIUS Scheme Required
Configuring RADIUS
Authentication/Authorization Servers
Required
Configuring RADIUS Accounting Servers Required
Configuring Shared Keys for RADIUS
Messages
Optional
Configuring the Maximum Number of
RADIUS Request Transmission Attempts
Optional
Configuring the Type of RADIUS Servers to
be Supported
Optional
Configuring the Status of RADIUS Servers Optional
Configuring the Attributes of Data to be Sent
to RADIUS Servers
Optional
Configuring Timers for RADIUS Servers Optional
Enabling Sending Trap Message when a
RADIUS Server Goes Down
Optional
Configuring the
RADIUS client
Enabling the User Re-Authentication at
Restart Function
Optional
Configuring the
RADIUS server
Refer to the configuration of the RADIUS
Server.
—

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English