H3C S3100 8C SI User Manual

Operation Manual – AAA
H3C S3100 Series Ethernet Switches Chapter 2 AAA Configuration
2-25
2.3 HWTACACS Configuration Task List
Table 2-23 HWTACACS configuration tasks
Task Remarks
Creating a HWTACACS Scheme Required
Configuring TACACS Authentication Servers Required
Configuring TACACS Authorization Servers Required
Configuring TACACS Accounting Servers Optional
Configuring Shared Keys for RADIUS Messages Optional
Configuring the Attributes of Data to be Sent to
TACACS Servers
Optional
Configuring the
TACACS client
Configuring the Timers Regarding TACACS
Servers
Optional
Configuring the
TACACS server
Refer to the configuration of TACACS servers. —
2.3.1 Creating a HWTACACS Scheme
The HWTACACS protocol configuration is performed on a scheme basis. Therefore,
you must create a HWTACACS scheme and enter HWTACACS view before performing
other configuration tasks.
Table 2-24 Create a HWTACACS scheme
Operation Command Remarks
Enter system view
system-view
—
Create a HWTACACS
scheme and enter its view
hwtacacs scheme
hwtacacs-scheme-name
Required
By default, no
HWTACACS scheme
exists.
Caution:
The system supports up to 16 HWTACACS schemes. You can delete a HWTACACS
scheme only when it is not referenced.

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English