H3C S3100 8C SI - Configuring a Downlink Port; Configuring the Uplink Port

Operation Manual – Smart Link-Monitor Link
H3C S3100 Series Ethernet Switches Chapter 2 Monitor Link Configuration
2-4
2.2.3 Configuring the Uplink Port
Table 2-3 Configure the uplink port
Operation Command Remarks
Enter system view
system-view
—
Enter the specified Monitor Link group
view
monitor-link group
group-id
—
Configure the specified
link aggregation group
as the uplink port of the
Monitor Link group
link-aggregation
group group-id uplink
Configure the specified
Smart Link group as
the uplink port of the
Monitor Link group
smart-link group
group-id uplink
Monitor
Link
group
view
port interface-type
interface-number
uplink
quit
interface interface-type
interface-number
Configure
the uplink
port for the
Monitor
Link group
Configure
the
specified
Ethernet
port as the
uplink port
of the
Monitor
Link group
Ethernet
port view
port monitor-link
group group-id uplink
Required
Use any of the
three
approaches
2.2.4 Configuring a Downlink Port
Table 2-4 Configure a downlink port
Operation Command Remarks
Enter system view
system-view
—
Enter the specified Monitor Link group
view
monitor-link group
group-id
Required