H3C S3100 8C SI User Manual

Operation Manual – Login
H3C S3100 Series Ethernet Switches Chapter 2 Logging in through the Console Port
2-6
Authentication
mode
Console port login
configuration
Remarks
Specify to
perform local
authenticatio
n or remote
RADIUS
authenticatio
n
AAA configuration
specifies whether
to perform local
authentication or
RADIUS
authentication
Optional
Local authentication is
performed by default.
Refer to the AAA part for
more.
Configure
user name
and
password
Configure user
names and
passwords for
local/RADIUS
users
Required
z The user name and
password of a local user
are configured on the
switch.
z The user name and
password of a RADIUS
user are configured on
the RADIUS server.
Refer to user manual of
RADIUS server for more.
Manage
AUX users
Set service type
for AUX users
Required
Scheme
Perform
common
configuration
Perform common
configuration for
Console port login
Optional
Refer to
Table 2-2.
 Note:
Changes made to the authentication mode for Console port login takes effect after you
quit the command-line interface and then log in again.
2.4 Console Port Login Configuration with Authentication
Mode Being None
2.4.1 Configuration Procedure
Table 2-4 Console port login configuration with the authentication mode being none
Operation Command Description
Enter system view
system-view
—
Enter AUX user interface
view
user-interface aux 0 —

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English