H3C S3100 8C SI User Manual

Operation Manual – Login
H3C S3100 Series Ethernet Switches Chapter 2 Logging in through the Console Port
2-7
Operation Command Description
Configure not to
authenticate users
authentication-mode
none
Required
By default, users logging in
through the Console port
(AUX user interface) are not
authenticated.
Set the
baud rate
speed speed-value
Optional
The default baud rate of a
Console port is 9,600 bps.
Set the
check
mode
parity { even | none |
odd }
Optional
By default, the check mode
of a Console port is none,
that is, no check is
performed.
Set the
stop bits
stopbits { 1 | 1.5 | 2 }
Optional
The stop bits of a Console
port is 1.
Configure the
Console port
Set the
data bits
databits { 7 | 8 }
Optional
The default data bits of a
Console port is 8.
Configure the command
level available to users
logging into the user
interface
user privilege level
level
Optional
By default, commands of
level 3 are available to users
logging into the AUX user
interface, and commands of
level 0 are available to users
logging into the VTY user
interface.
Enable terminal services
shell
Optional
By default, terminal services
are available in all user
interfaces.
Set the maximum number
of lines the screen can
contain
screen-length
screen-length
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0 command
to disable the function to
display information in pages.
Set the history command
buffer size
history-command
max-size value
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English