H3C S3100 8C SI User Manual

Operation Manual – MAC Address Authentication
H3C S3100 Series Ethernet Switches Chapter 1 MAC Authentication Configuration
1-4
Operation Command Remarks
Configure the
MAC
authentication
timers
mac-authentication timer
{ offline-detect offline-detect-value | quiet
quiet-value | server-timeout
server-timeout-value }
Optional
The default
timeout values
are as follows:
300 seconds for
offline detect
timer;
60 seconds for
quiet timer; and
100 seconds for
server timeout
timer
Caution:
z If MAC authentication is enabled on a port, you cannot configure the maximum
number of dynamic MAC address entries for that port (through the mac-address
max-mac-count command), and vice versa.
z If MAC authentication is enabled on a port, you cannot configure port security
(through the port-security enable command) on that port, and vice versa.
z You can configure MAC authentication on a port before enabling it globally.
However, the configuration will not take effect unless MAC authentication is enabled
globally.
1.4 MAC Address Authentication Enhanced Function
Configuration
1.4.1 MAC Address Authentication Enhanced Function Configuration Tasks
Table 1-2 MAC address authentication enhanced function configuration tasks
Operation Description Related section
Configure a Guest VLAN Optional
Section
1.4.2 “Configuring a
Guest VLAN
”
Configure the maximum
number of MAC address
authentication users
allowed to access a port
Optional
Section 1.4.3 “Configuring the
Maximum Number of MAC
Address Authentication Users
Allowed to Access a Port
”
Configuring quiet MAC
function on a port
Optional
Section 1.4.4 “Configuring the
Quiet MAC Function on a Port
”

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English