H3C S3100 8C SI User Manual

Operation Manual – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches Chapter 1 FTP and SFTP Configuration
1-7
Operation Command Description
dir [ remotefile ] [ localfile ]
Query a specified file on
the FTP server
ls [ remotefile ] [ localfile ]
Optional
If no file name is specified,
all the files in the current
directory are displayed.
The difference between
these two commands is
that the dir command can
display the file name,
directory as well as file
attributes; while the Is
command can display
only the file name and
directory.
Download a remote file
from the FTP server
get remotefile [ localfile ]
Upload a local file to the
remote FTP server
put localfile [ remotefile ]
Rename a file on the
remote server
rename remote-source
remote-dest
Log in with the specified
user name and password
user username
[ password ]
Connect to a remote FTP
server
open { ip-address |
server-name } [ port ]
disconnect
Terminate the current
FTP connection without
exiting FTP client view
close
quit
Terminate the current
FTP connection and
return to user view
bye
Display the online help
about a specified
command concerning
FTP
remotehelp
[ protocol-command ]
Optional
Enable the verbose
function
verbose
Optional
Enabled by default
1.2.3 Configuration Example: A Switch Operating as an FTP Server
I. Network requirements
A switch operates as an FTP server and a remote PC as an FTP client. The application
switch.bin of the switch is stored on the PC. Upload the application to the remote
switch through FTP and use the boot boot-loader command to specify switch.bin as
the application for next startup. Reboot the switch to upgrade the switch application and

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English