Operation Manual – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Chapter 1 Boot ROM and Host Software
Loading
1-2
Note:
The loading process of the Boot ROM software is the same as that of the host software,
except that during the former process, you should press “6” or <Ctrl+U> and <Enter>
after entering the BOOT menu and the system gives different prompts. The following
text mainly describes the Boot ROM loading process.
1.2.1 BOOT Menu
Starting......
***********************************************************
* *
* H3C S3100-26TP-EI-W BOOTROM, Version 506 *
* *
***********************************************************
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Creation date : Apr 17 2007, 10:12:36
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size : 64MB
Mac Address : 000fe2123456
Press Ctrl-B to enter Boot Menu...
Press <Ctrl+B>. The system displays:
Password :
Note:
To enter the BOOT menu, you should press <Ctrl+B> within five seconds ( full startup
mode ) or one second (fast startup mode) after the information “Press Ctrl-B to enter
BOOT Menu...” displays. Otherwise, the system starts to extract the program; and if
you want to enter the BOOT Menu at this time, you will have to restart the switch.
To Next Page
Loading...
Need help?
General