Operation Manual – 802.1x-System Guard
H3C S3100 Series Ethernet Switches Chapter 2 Quick EAD Deployment Configuration
2-4
2.2.3 Displaying and Maintaining Quick EAD Deployment
After performing the above configurations, you can display and verify the quick EAD
deployment-related configuration by executing the display command in any view.
Table 2-3 Display quick EAD deployment
To do... Use the command... Remarks
Display configuration
information about quick
EAD deployment
display dot1x [ sessions
| statistics ] [ interface
interface-list ]
This command can be
executed in any view.
2.3 Quick EAD Deployment Configuration Examples
I. Network requirements
A user connects to the switch directly. The switch connects to the Web server and the
Internet. The user will be redirected to the Web server to download the authentication
client and upgrade software when accessing the Internet through IE before passing
authentication. After passing authentication, the user can access the Internet.
II. Network diagram
Figure 2-1 Network diagram for quick EAD deployment
To Next Page
Loading...
Need help?
General