H3C S3100 8C SI - Displaying and Maintaining the System-Guard Function

Operation Manual – 802.1x-System Guard
H3C S3100 Series Ethernet Switches Chapter 5 System-Guard Configuration (For S3100-SI)
5-3
5.3 Displaying and Maintaining the System-Guard Function
After the above configuration, you can display and verify your configuration by
performing the operation listed in
Table 5-4.
Table 5-4 Display and debug the system-guard function
Operation Command Description
Display system-guard
configuration
display system-guard
config
This command can be
executed in any view.