Operation Manual – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches Chapter 1 FTP and SFTP Configuration
1-5
Figure 1-2 Process of displaying a shell banner
Table 1-7 Configure the banner display for an FTP server
Operation Command Description
Enter system view
system-view
—
Configure a login banner
header login text
Configure a shell banner
header shell text
Required
Use either command or both.
By default, no banner is
configured.
 Note:
For details about the header command, refer to the Login part of the manual.
VI. Displaying FTP server information
After the above configurations, you can execute the display commands in any view to
display the running status of the FTP server and verify your configurations.
Table 1-8 Display FTP server information
Operation Command Description
Display the information about FTP
server configurations on a switch
display ftp-server
Display the login FTP client on an
FTP server
display ftp-user
Available in any
view
To Next Page
Loading...
Need help?
General