Operation Manual – Voice VLAN
H3C S3100 Series Ethernet Switches Chapter 1 Voice VLAN Configuration
1-10
To do… Use the command… Remarks
Enable the voice VLAN function
globally
voice vlan vlan-id
enable
Required
Enter port view
interface interface-type
interface-number
Required
Enable voice VLAN on a port
voice vlan enable
Required
By default, voice
VLAN is disabled
on a port.
Enable the voice VLAN legacy
function on the port
voice vlan legacy
Optional
By default, voice
VLAN legacy is
disabled.
Set voice VLAN assignment mode
on a port to manual
undo voice vlan mode
auto
Required
The default voice
VLAN assignment
mode on a port is
automatic.
Quit to system view
quit
—
Enter VLAN
view
vlan vlan-id
Access
port
Add the port to
the VLAN
port interface-list
Enter port view
interface interface-type
interface-num
Add the port to
the VLAN
port trunk permit vlan
vlan-id
port hybrid vlan
vlan-id { tagged |
untagged }
Required
By default, all the
ports belong to
VLAN 1.
Add a
port in
manua
l voice
VLAN
assign
ment
mode
to the
voice
VLAN
Trunk
or
Hybrid
port
Configure the
voice VLAN to
be the default
VLAN of the
port
port trunk pvid vlan
vlan-id
port hybrid pvid vlan
vlan-id
Optional
Refer to
Table 1-2
to determine
whether or not this
operation is
needed.
To Next Page
Loading...
