Operation Manual – Port Basic Configuration
H3C S3100 Series Ethernet Switches Chapter 1 Port Basic Configuration
1-10
I. Disable Up/Down log output on a port
Table 1-10 Disable UP/Down log output on a port
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Disable a port from
outputting UP/Down Log
Information
undo enable log
updown
Required
By default, UP/Down log
information output is
enabled.
II. Configuration example
# By default, a port is allowed to output the Up/Down log information. Execute the
shutdown command or the undo shutdown command on Ethernet 1/0/1, and the
system outputs Up/Down log information of Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] shutdown
%Apr 5 07:25:37:634 2000 Sysname L2INF/5/PORT LINK STATUS CHANGE:- 1 -
Ethernet1/0/1 is DOWN
[Sysname-Ethernet1/0/1] undo shutdown
%Apr 5 07:25:56:244 2000 Sysname L2INF/5/PORT LINK STATUS CHANGE:- 1 -
Ethernet1/0/1 is UP
# After you disable Ethernet 1/0/1 from outputting Up/Down log information and
execute the shutdown command or the undo shutdown command on Ethernet 1/0/1,
no Up/Down log information is output for Ethernet 1/0/1.
[Sysname-Ethernet1/0/1] undo enable log updown
[Sysname-Ethernet1/0/1] shutdown
[Sysname-Ethernet1/0/1] undo shutdown
To Next Page
Loading...
Need help?
General