EasyManuals Logo

H3C S3100 8C SI User Manual

H3C S3100 8C SI
944 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #393 background imageLoading...
Page #393 background image
Operation Manual – AAA
H3C S3100 Series Ethernet Switches Chapter 1 AAA Overvie
w
1-6
Code Message type Message description
5
Accounting-Respons
e
Direction: server->client.
The server transmits this message to the client to
notify the client that it has received the
Accounting-Request message and has correctly
recorded the accounting information.
2) The Identifier field (one byte) is used to match requests and responses. It changes
whenever the content of the Attributes field changes, and whenever a valid
response has been received for a previous request, but remains unchanged for
message retransmission.
3) The Length field (two bytes) specifies the total length of the message (including
the Code, Identifier, Length, Authenticator and Attributes fields). The bytes beyond
the length are regarded as padding and are ignored upon reception. If a received
message is shorter than what the Length field indicates, it is discarded.
4) The Authenticator field (16 bytes) is used to authenticate the response from the
RADIUS server; and is used in the password hiding algorithm. There are two kinds
of authenticators: Request Authenticator and Response Authenticator.
5) The Attributes field contains specific authentication/authorization/accounting
information to provide the configuration details of a request or response message.
This field contains a list of field triplet (Type, Length and Value):
z The Type field (one byte) specifies the type of an attribute. Its value ranges from 1
to 255.
Table 1-2 lists the attributes that are commonly used in RADIUS
authentication/authorization.
z The Length field (one byte) specifies the total length of the attribute in bytes
(including the Type, Length and Value fields).
z The Value field (up to 253 bytes) contains the information of the attribute. Its
format is determined by the Type and Length fields.
Table 1-2 RADIUS attributes
Type field
value
Attribute type
Type field
value
Attribute type
1 User-Name 23 Framed-IPX-Network
2 User-Password 24 State
3 CHAP-Password 25 Class
4 NAS-IP-Address 26 Vendor-Specific
5 NAS-Port 27 Session-Timeout
6 Service-Type 28 Idle-Timeout
7 Framed-Protocol 29 Termination-Action
8 Framed-IP-Address 30 Called-Station-Id

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 8C SI and is the answer not in the manual?

H3C S3100 8C SI Specifications

General IconGeneral
BrandH3C
ModelS3100 8C SI
CategorySwitch
LanguageEnglish

Related product manuals