H3C S3100 8C SI - Page 412

Operation Manual – AAA
H3C S3100 Series Ethernet Switches Chapter 2 AAA Configuration
2-15
Operation Command Remarks
Set the IP address and
port number of the
primary RADIUS
accounting server
primary accounting
ip-address [ port-number ]
Required
By default, the IP address
and UDP port number of
the primary accounting
server are 0.0.0.0 and
1813 for a newly created
RADIUS scheme.
Set the IP address and
port number of the
secondary RADIUS
accounting server
secondary accounting
ip-address [ port-number ]
Optional
By default, the IP address
and UDP port number of
the secondary accounting
server are 0.0.0.0 and
1813 for a newly created
RADIUS scheme.
Enable stop-accounting
request buffering
stop-accounting-buffer
enable
Optional
By default,
stop-accounting request
buffering is enabled.
Set the maximum number
of transmission attempts
of a buffered
stop-accounting request.
retry stop-accounting
retry-times
Optional
By default, the system
tries at most 500 times to
transmit a buffered
stop-accounting request.
Set the maximum allowed
number of continuous
real-time accounting
failures
retry
realtime-accounting
retry-times
Optional
By default, the maximum
allowed number of
continuous real-time
accounting failures is five.
If five continuous failures
occur, the switch cuts
down the user connection.