EasyManua.ls Logo

H3C S3100 8C SI - Page 541

H3C S3100 8C SI
944 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Manual – QoS-QoS Profile
H3C S3100 Series Ethernet Switches Chapter 1 QoS Configuration
1-22
Table 1-15 Mark the priority for packets that are of a VLAN and match specific ACL
rules
Operation Command Description
Enter system view
system-view
Mark the priorities for
packets matching
specific ACL rules
traffic-priority vlan vlan-id
inbound acl-rule { dscp
dscp-value | cos cos-value |
local-precedence pre-value }*
Required
Table 1-16 Mark the priority for packets that are of a port group and match specific ACL
rules
Operation Command Description
Enter system view
system-view
Enter port group view
port-group group-id
Mark the priorities for
packets matching
specific ACL rules
traffic-priority inbound acl-rule
{ dscp dscp-value | cos cos-value
| local-precedence pre-value }*
Required
Table 1-17 Mark the priority for packets passing a port and matching specific ACL rules
Operation Command Description
Enter system view
system-view
Enter Ethernet port
view
interface interface-type
interface-number
Mark the priorities for
packets matching
specific ACL rules
traffic-priority inbound acl-rule { dscp
dscp-value | cos cos-value |
local-precedence pre-value }*
Required
Note:
The priority marking function configured on a VLAN is only applicable to packets
tagged with 802.1Q header.
III. Configuration example
z Ethernet 1/0/1 belongs to VLAN 2 and is connected to the 10.1.1.0/24 network
segment.
z Mark the DSCP precedence as 56 for the packets from the 10.1.1.0/24 network
segment.

Table of Contents

Related product manuals