Operation Manual – QoS-QoS Profile
H3C S3100 Series Ethernet Switches Chapter 1 QoS Configuration
1-31
I. Configuration prerequisites
The ACL rules for traffic classification are defined. Refer to the ACL module of this
manual for information about defining ACL rules.
II. Configuration procedure
You can generate traffic statistics or clear traffic statistics on all the packets matching
specific ACL rules, or on packets that match specific ACL rules and are of a VLAN, of a
port group, or pass a port.
Table 1-29 Generate traffic statistics on all the packets matching specific ACL rules
Operation Command Description
Enter system view
system-view
—
Generate the statistics on the packets
matching specific ACL rules
traffic-statistic
inbound acl-rule
Required
Clear the statistics on the packets
matching specific ACL rules
reset traffic-statistic
inbound acl-rule
Optional
Table 1-30 Generate traffic statistics on packets that are of a VLAN and match specific
ACL rules
Operation Command Description
Enter system view
system-view
—
Generate the statistics on the packets
matching specific ACL rules
traffic-statistic vlan
vlan-id inbound acl-rule
Required
Clear the statistics on the packets
matching specific ACL rules
reset traffic-statistic
vlan vlan-id inbound
acl-rule
Optional
Table 1-31 Generate traffic statistics on packets that are of a port group and match
specific ACL rules
Operation Command Description
Enter system view
system-view
—
Enter port group view
port-group group-id
—
Generate the statistics on the packets
matching specific ACL rules
traffic-statistic
inbound acl-rule
Required
Clear the statistics on the packets
matching specific ACL rules
reset traffic-statistic
inbound acl-rule
Optional
To Next Page
Loading...
