Operation Manual – QoS-QoS Profile
H3C S3100 Series Ethernet Switches Chapter 1 QoS Configuration
1-34
Table 1-34 Configure traffic mirroring globally
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port view of
the destination port
interface interface-type
interface-number
—
Define the current port as the
destination port
monitor-port
Required
Exit current view
quit
—
Reference ACLs for
identifying traffic flows and
perform traffic mirroring for
packets that match.
mirrored-to inbound
acl-rule { cpu |
monitor-interface }
Required
Table 1-35 Configure traffic mirroring for a VLAN
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port view of the
destination port
interface interface-type
interface-number
—
Define the current port as the
destination port
monitor-port
Required
Exit current view
quit
—
Reference ACLs for identifying
traffic flows and perform traffic
mirroring for packets that match.
mirrored-to vlan vlan-id
inbound acl-rule { cpu |
monitor-interface }
Required
Table 1-36 Configure traffic mirroring for a port group
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port view of the
destination port
interface interface-type
interface-number
—
Define the current port as the
destination port
monitor-port
Required
Exit current view
quit
—
Enter port group view
port-group group-id
—
Reference ACLs for identifying
traffic flows and perform traffic
mirroring for packets that match.
mirrored-to inbound
acl-rule { cpu |
monitor-interface }
Required