Operation Manual – SSH
H3C S3100 Series Ethernet Switches Chapter 1 SSH Configuration
1-20
Figure 1-7 SSH client configuration interface 1
In the Host Name (or IP address) text box, enter the IP address of the server. Note
that there must be a route available between the IP address of the server and the client.
III. Selecting a protocol for remote connection
As shown in Figure 1-7, select SSH under Protocol.
IV. Selecting an SSH version
From the category on the left pane of the window, select SSH under Connection. The
window as shown in
Figure 1-8 appears.
To Next Page
Loading...
