H3C S3100 8C SI User Manual

Operation Manual – Information Center
H3C S3100 Series Ethernet Switches Chapter 1 Information Center
1-2
z If the threshold is set to 1, only information with the severity being emergencies will
be output;
z If the threshold is set to 8, information of all severities will be output.
III. Ten channels and six output directions of system information
The system supports six information output directions, including the Console, Monitor
terminal (monitor), logbuffer, loghost, trapbuffer and SNMP.
The system supports ten channels. The channels 0 through 5 have their default
channel names and are associated with six output directions by default. Both the
channel names and the associations between the channels and output directions can
be changed through commands.
Table 1-2 Information channels and output directions
Information
channel number
Default channel
name
Default output direction
0 console
Console (Receives log, trap and debugging
information)
1 monitor
Monitor terminal (Receives log, trap and
debugging information, facilitating remote
maintenance)
2 loghost
Log host (Receives log, trap and
debugging information and information will
be stored in files for future retrieval.)
3 trapbuffer
Trap buffer (Receives trap information, a
buffer inside the device for recording
information.)
4 logbuffer
Log buffer (Receives log information, a
buffer inside the device for recording
information.)
5 snmpagent SNMP NMS (Receives trap information)
6 channel6
Not specified (Receives log, trap, and
debugging information)
7 channel7
Not specified (Receives log, trap, and
debugging information)
8 channel8
Not specified (Receives log, trap, and
debugging information)
9 channel9
Not specified (Receives log, trap, and
debugging information)

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English