H3C S3100 8C SI User Manual

Operation Manual – Information Center
H3C S3100 Series Ethernet Switches Chapter 1 Information Center
1-11
Table 1-8 Default output rules for different output directions
LOG TRAP DEBUG
Output
direction
Modules
allowed
Enabl
ed/dis
abled
Severi
ty
Enable
d/disab
led
Severit
y
Enable
d/disab
led
Severit
y
Console
default
(all
modules)
Enabl
ed
warnin
gs
Enable
d
debuggi
ng
Enable
d
debuggi
ng
Monitor
terminal
default
(all
modules)
Enabl
ed
warnin
gs
Enable
d
debuggi
ng
Enable
d
debuggi
ng
Log host
default
(all
modules)
Enabl
ed
inform
ational
Enable
d
debuggi
ng
Disable
d
debuggi
ng
Trap
buffer
default
(all
modules)
Disabl
ed
inform
ational
Enable
d
warning
s
Disable
d
debuggi
ng
Log
buffer
default
(all
modules)
Enabl
ed
warnin
gs
Disable
d
debuggi
ng
Disable
d
debuggi
ng
SNMP
NMS
default
(all
modules)
Disabl
ed
debug
ging
Enable
d
warning
s
Disable
d
debuggi
ng
II. Enabling system information display on the console
After setting to output system information to the console, you need to enable the
associated display function to display the output information on the console.
Table 1-9 Enable the system information display on the console:
Operation Command Description
Enable the debugging/log/trap
information terminal display
function
terminal monitor
Optional
Enabled by default.
Enable debugging information
terminal display function
terminal debugging
Optional
Disabled by default.
Enable log information
terminal display function
terminal logging
Optional
Enabled by default.
Enable trap information
terminal display function
terminal trapping
Optional
Enabled by default.

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English