H3C S3100 8C SI User Manual

Operation Manual – HWPing
H3C S3100 Series Ethernet Switches Chapter 1 HWPing Configuration
1-19
Operation Command Description
Configure the automatic
test interval
frequency interval
Optional
By default, the automatic
test interval is zero
seconds, indicating no
automatic test will be
made.
Configure the probe
timeout time
timeout time
Optional
By default, a probe times
out in three seconds.
Configure the type of
service
tos value
Optional
By default, the service
type is zero.
Configure the domain
name to be resolved
dns
resolve-targetdomai
domainname
Required
By default, the domain
name to be resolved by
DNS is not specified.
Configure the IP address
of the DNS server
dns-server ip-address
Required
By default, no DNS server
address is configured.
Start the test
test-enable
Required
Display test results
display hwping results
[ admin-name
operation-tag ]
Required
The display command
can be executed in any
view.
II. Configuring HWPing client to send Trap messages
Trap messages are generated regardless of whether the HWPing test succeeds or fails.
You can specify whether to output Trap messages by enabling/disabling Trap sending.
Table 1-14 Configure the HWPing client to send Trap messages
Operation Command Description
Enter system view
system-view
—
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing
client function is disabled.
Create a HWPing test
group and enter its view
hwping
administrator-name
operation- tag
Required
By default, no test group
is configured.

H3C S3100 8C SI Specifications

General

Brand	H3C
Model	S3100 8C SI
Category	Switch
Language	English