Operation Manual – Configuration File Management
H3C S3100 Series Ethernet Switches Chapter 1 Configuration File Management
1-6
Table 1-5 Display Device Configuration
Operation Command Description
Display the initial configuration
file saved in the storage
device
display saved-configuration
[ unit unit-id ] [ by-linenum ]
Display the configuration file
used for this and next startup
display startup [ unit unit-id ]
Display the current VLAN
configuration of the device
display current-configuration
vlan [ vlan-id ] [ by-linenum ]
Display the validated
configuration in current view
display this [ by-linenum ]
Display current configuration
display current-configuration
[ configuration
[ configuration-type ] | interface
[ interface-type ]
[ interface-number ] ]
[ by-linenum ] [ | { begin |
exclude | include }
regular-expression ]
You can
execute the
display
command in
any view.
To Next Page
Loading...
