Lucent Technologies FT-2000 OC-48 - Page 10

x Issue 8.0 July 2002
Contents
5 Control, Transmission, and
Synchronization Interfaces 5-1
■ Overview 5-1
■ Control 5-1
■ Transmission 5-5
FT-2000 OC-48 Add/Drop-Rings Terminal 5-5
FT-2000 OC-48 Repeater Bay 5-9
■ Synchronization Modes 5-10
Platform Synchronization 5-10
Network Synchronization 5-19
6 Operations Interfaces 6-1
■ Overview 6-1
■ Craft Interface Terminal 6-1
General 6-1
PC with FT-2000 CIT-PC Software 6-2
PC with CPro-2000 Software 6-5
ASCII-Based Terminal 6-7
Local Access Through the CIT (DCE) Port 6-8
Dial-Up Access Using a Modem Through the CIT
(DTE) Port 6-8
Remote Access Using the OC-48 Data
Communications Channel (DCC) 6-10
Remote Access Using the OC-48 Section Orderwire 6-10
Remote Access Using the OC-3/OC-12 Data
Communications Channel (DCC) 6-12
■ User Panel 6-13
■ Filter Panel 6-17
■ Office Alarms Interface 6-19
■ Parallel Telemetry Interface 6-20
■ User-Settable Miscellaneous Discrete Interface 6-20
■ Serial Telemetry Interface 6-22