© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
1. New in the Manual
This is an outline of all changes that took place in the latest version compared to the previous version of the
manual.
After every software update the manual will be updated as well.
Topic Description
Update the console Update your console via Linux USB stick.
Speed The key Speed can be used to create five Special Masters.
Executor Bar
Enabled executors with more than 1 cue are now displayed in two
lines.
Global Settings It is possible to control the desk via web remote.
Magic Speeds There are four Master Speeds now.
Network Protocols
Configuration
Art-Net and sACN inputs and outputs are now individually
assignable to the dot2 universes.
SetIP
The command SetIP now also changes the IP address of the web
remote.
Settings of Executor
The playbacks have an additional priority called the Super Priority
(!).
Settings of Executor
New icon. The Super Priority (!) is indicated by an exclamation
mark in the fixture view.
Effects
It is possible to enable Groups and Blocks in the effect encoder
bar.
Select Function of
Executor
It is possible to switch one or both of the 100 mm faders to magic
speed masters.
Fixtures
You can now toggle between names of presets, channel sets and
values.
Fixtures Additional button in the fixture view on the right.
Use external input
triggers
DMX-in can be used via Art-Net and sACN.
To Next Page
Loading...
