MA lighting dot2 - Select key

To Next Page

To Previous Page

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

5.56. Select key

Pressing the Select key gives you the Select command.

This can be used to select the fixtures used on an executor.

E.g. you need to select all the fixtures used in the cue list on executor 2:

Press Select and now press any of the keys associated with executor number 2.

Or if you need to select the fixtures stored in cue number 3 on executor 5:

Select Cue 3 Exec 5 Please

Other manuals for MA lighting dot2