© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.39. Move Command
This page describes the syntax and how to use the move command.
To go to the move command, press Move on the console.
Description
With the move command you can move objects e.g.:
Groups to another position in the groups pool
Presets to another position in the presets pool
Executors to another position in the executor pool or to another page pool
Syntax
1. Move a group to another position.
Move Group 1 At 3
2. Move a preset to another position.
Move Preset 1 At 3
3. Move an executor to another position on the same page.
Move Executor 1 At 3
4. Move an executor to another position on another page.
Move Executor 1.1 At 2.1
5. Move the main executor to executor six at page 1.
Move Executor 0.1.1 at 1.6
Example 1
Let´s assume, you will move group 50 at 1.
There are two ways to do this.
a) Press Move Group 50 At 1 Please .
To Next Page
Loading...
