© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
5.11. . [dot] key
The . key is used as a separator when typing commands like cue numbers.
E.g. you want to store cue number 2.5 in the main cue list:
Store Cue 2 . 5 Please
This key is also used as a shortcut. Pressing it twice (like a double click) will take the value of 0% in your
programmer for the currently selected fixtures. This is a command called Zero.
E.g. you have selected fixture number 1 and want to put it to 0% all you need to do is to press . . .
Advanced functionality
Pressing and holding the while pressing the . key will give you the Default command.
This is used to get the default value (the value a fixture have when nothing tells it otherwise). It technically
creates a link to this value as if it was a preset.
This can be useful in some rare situations.
To Next Page
Loading...
