© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
5.21. Fixture key
The Fixture key will open the Fixtures View on screen one.
The key can also be used to directly access the Fixture command, that can be used to select fixtures using the
keys.
E.g. you want to select fixture 1 to 5 and 9. You can do this using these keys:
Fixture 1 Thru 5 + 9 Please
Advanced Functionality
If you press and hold the key and then press the Fixture key gives you the Selection Command. This
command doesn't do much. The only real purpose for this is in combination with Off. If you want to knockout the
currently selected fixtures of the programmer, then you can do the following:
Off + Fixture Please
This will remove the programmer values of the selected fixtures and clear the selection.
Related links
Fixtures View
Fixture command
Selection Command
To Next Page
Loading...
