MA lighting dot2 - Fixture Command

To Next Page

To Previous Page

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

7.23. Fixture Command

This page describes the syntax and how to use the fixture command.

To go to the fixture command, press Fixture on the console.

Description

With the fixture command you select fixtures in the fixtures view.

Syntax

Select fixtures.

Fixture 10

Example 1

Let´s assume, you will select all dimmers fixtures 1 thru 10.

Press Fixture 1 Thru 10 Please .

All fixtures from 1 to 10 are selected in the fixtures view.

Example 2

Let´s assume, you will just select subfixture 5 of the fixture cluster 11.

Press Fixture 11 . 5 Please .

Subfixture 5 of fixture cluster 11 is selected in the fixtures view.

Other manuals for MA lighting dot2