© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.15. Delete Command
This page describes the syntax and how to use the delete command.
To go to the delete command, press Delete on the console.
Delete is in the command line, now.
Description
With the delete command, you can
delete cues from a cue list
delete pool objects (e.g. preset type, groups) from the respective pool (e.g. position preset type pool, groups
pool)
unpatch fixtures from the DMX universe
Syntax
1. Delete a cue from a cue list.
Delete Cue 1 Executor 1
2. Delete a pool object from the respective pool.
Delete Preset 1.1
3. Unpatch a fixture from the DMX universe.
Delete Fixture 1
Example 1
Let´s assume, you will delete cue 1 from the main executor.
There are three different ways to do this:
a) Press Delete 1 (= Cue 1) Please .
b) Press Delete 1 (= Cue 1) and tap on the main executor in the executor bar view.
c) Press Delete 1 (= Cue 1) and press the large Go on the console.
If a cue list is stored on the main executor, the console ask to choose the delete method.
To Next Page
Loading...
