© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
6.73. Shapers Preset Type View
To go to the Shapers Preset Type View, tap Shapers in the Preset Type Bar.
- or -
Press and hold and press 8 , for preset type 8 (= Shapers).
To open the shapers effects view, tap at in the title bar.
The shapers preset type view is only active if the selected fixture type has shapers attributes.
The shapers preset type view is fragmented in the several raw views.
In the raw shapers view, you control the raw shapers values in natural values (0-100) of the selected fixture type.
Encoder Bar Functions
In the upper left corner of the encoder is the corresponding slider displayed.
To select the value, turn the encoder left or right.
To change the encoder speed to slow, press the encoder key .
To change the encoder speed to ultra slow, press and hold the key and press the encoder key .
To open the calculator, press the encoder.
To Next Page
Loading...
