© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.40. Off Command
This page describes the syntax and how to use the off command.
To go to the off command, press Off on the console.
Description
With the off command you can
turn an executor off
turn an executor with fade time off
turn off all normal executors assigned with a cue list
remove selected fixtures from the fixtures view
Syntax
1. Turn off the main executor.
Off
2. Turn off an executor with fade time.
Off Executor 1 Fade 2
3. Turn off all normal executors with a cue list.
Off Thru
4. Remove fixtures along with their values from the programmer in the fixtures view.
Off Fixture 3
Example 1
Let´s assume, you will turn executor 1 off.
There are three ways to do this.
a) Press Off , and the respective executor button .
b) Press Off Exec 1 Please .
c) Press Off , and tap the respective executor button in the executor bar view.
To Next Page
Loading...
