© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.3. - [Minus] Command
This page describes the syntax and how to use the - [Minus] command.
Description
With the - [Minus] command you can:
Deselect objects from a selection list
Reduce the dimmer value
Call the previous page
Syntax
1. Remove objects from a list:
- 5
2. Reduce dimmer values:
At - 12
3. Call previous page:
Page -
The - [Minus] command is a helping command and needs a second command or a number.
Example 1
Let´s assume, you have a long selection list with fixtures and you will deselect one of them.
To Next Page
Loading...
