7.48. PresetType Command
This page describes the syntax and how to use the PresetType command.
To go to the PresetType command, press and hold and Preset on the console.
Description
With the PresetType command, you open a
preset type pool by preset type number
preset type pool by preset type name
Syntax
1. Open a preset type pool by preset type number.
PresetType 1
2. Open a preset type pool by preset type name.
PresetType Dimmer
Example 1
Let´s assume, you will open the color preset pool by number.
Requirement: Presets is selected in the view bar.
There are two ways to do this:
a) Tap Color in the preset type bar.
b) Press + Preset (= PresetType) 4 (= number of the color preset type) Please .
The color preset pool is open.
Example 2
Let´s assume, you will open the control preset type pool by preset type name.
Requirement: Presets is selected in the view bar
There are two ways to do this:
a) Tap Control in the preset type bar.
b) Press + Preset (= PresetType) and enter in the command line the word Control. Tap Enter .
To Next Page
Loading...
