9.4. Error Messages
If the following error messages do not solve the problem, please call or send an email to the tech support. See the
email address in the footer of this web page.
Phone: +49 5251 688 865 27
Phone for emergency services only: +49 5251 688 865 99 (Use this hotline only if troubles occur shortly before an
upcoming event.)
Error Reason
# 0 Unknown error There is an unknown error in the console.
# 1 Unknown
command
The command entered is unknown.
# 2 Input too long The command entered is too long.
# 3 Illegal character The command entered is illegal.
# 4 Command not
implemented
The console does not support the command entered.
# 5 Number expected The console expects a number.
# 6 IP expected The console expects an IP address.
# 7 Number too large The number entered is too large.
# 8 Number too small
The number entered in the command is too small (minimum 1
character).
# 9 Number too large
The number entered in the command is too large (maximum 1
character).
# 10 Expected The console expects more input.
# 11 Expected
argument
The command entered is missing an argument.
# 12 Expected name
The console expects a name, for example if the command Label
was canceled.
# 13 Illegal name
The object name entered is not allowed. Use English characters
only.
# 14 Object does not
exist
The object you tried to work with does not exist (for example if you
tried to assign a function to an executor without any cues stored).
# 15 Object not
accessible
The object entered is not accessible.
# 16 Resize forbidden It is forbidden to resize the command entered.
# 17 Delete forbidden It is forbidden to use the command Delete to delete an object.
# 18 Create forbidden Is is forbidden to use the command Create to create an object.
# 19 Illegal range The value entered exceeds the range of the value allowed.
# 20 Cannot leave
current destination
You cannot leave the current destination as this may cause a multi
user conflict.
To Next Page
Loading...
