© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
9.1. CrashLogCopy Command
This page describes the syntax and how to use the CrashLogCopy command.
To use the CrashLogCopy command, type CrashLogCopy in the command line.
Description
With the CrashLogCopy command, you can copy crash log files to the inserted USB stick.
The crash log files are in the folder dot2\temp.
To delete crash log files from the dot2 console, use the CrashLogDelete command.
For more information, refer to Error Handling.
Syntax
CrashLogCopy
Example
Let´s assume, the console crashes and you will get a crash log file for technical support.
1. Type in the command line:
CrashLogCopy
2. Press Please .
The crash log file is on the inserted USB stick in the folder dot2\temp.
To Next Page
Loading...
