© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.21. Fade Command
This page describes the syntax and how to use the fade command.
To go to the fade command it is necessary to press another function key before, e.g. Store Time (=Fade).
Description
With the fade command, you indicate fade times
to go to a cue with a fade time
for a new created cue with fade time
in a existing cue
Syntax
1. Go to cue 2 with a fade time of 3 seconds.
Goto Cue 2 Fade 3
2. Create a new cue 1 with a fade time of 3 seconds.
Store Cue 1 Fade 3
3. Assign a fade time of 5 seconds to the existing cue 3 on executor 1.
Assign Fade 3 Cue 1 Executor 1
Example 1
Let´s assume, you will go to cue 2 on executor 1 with a fade time of 3 seconds.
Press Goto Cue 2 Exec 1 Time (=Fade) 3 Please .
The console goes to cue 2 on executor 1 with a fade time of 3 seconds.
Example 2
Let´s assume, you will store a new cue 1 on the main executor with a fade time of 3 seconds.
Press Store 1 (= Cue 1) Time (=Fade) 3 Please .
Cue 1 is stored on the main executor with a fade time of 3 seconds.
To Next Page
Loading...
