MA lighting dot2 - GoBack Command

To Next Page

To Previous Page

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

7.28. GoBack Command

This page describes the syntax and how to use the GoBack command.

To go to the GoBack command, press the small Go - on the console.

Description

With the GoBack command, you go back to the previous cue on a cue list.

Syntax

Go back to the previous cue on a cue list.

GoBack

Example

Let´s assume, the executor 1 is running and you will go back to the previous cue on the cue list stored on

executor 1.

There are two ways to do this.

a) Press the small Go - (= GoBack) and the respective executor button .

b) Press the small Go - (= GoBack) and tap on the respective executor in the executor bar view.

The previous cue is running.

Other manuals for MA lighting dot2