© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
6.18. Control Preset Type View
To go to the Control Preset Type View, tap Control in the Preset Type Bar.
- or -
Press and hold and press 7 , for preset type 7 (= Control).
The control preset type view is only active if the selected fixture type has a control channel.
The control preset type view has one default tab control view and depending on the fixture type raw control views.
Control View
The control view is the first tab of the control preset type view.
In the control view, you control the control channels of the selected fixture types.
Except the three buttons on the bottom of the view, the buttons are depending on the selected fixture types.
The three buttons at the bottom of the screen are default buttons.
The buttons above the default buttons are different depending on the fixture.
If you tap at one of these buttons, a progress bar appears until the function is finished.
It is not possible to cancel a started functions or undo it.
To Next Page
Loading...
