7.7. Black Command
This page describes the syntax and how to use the Black command.
To go to the Black command press and hold the key and the <<< [GoFastBack] key on the console.
Description
With the black command you set the dimmer attribute of an executor to 0 %
temporary, as long as you press and hold the executor
with a command
Syntax
To set the dimmer attribute of an executor to 0 %.
Black
Example 1
Let´s assume you will temporary set the dimmer attribute of executor 3 to 0 % as long as you press and hold the
executor.
Press and hold and <<< [GoFastBack] (=Black) and press and hold the respective executor button .
As long as you hold the executor button, the black command will be executed.
As soon as you leave the executor button, the executor is back in its normal status.
Example 2
Let´s assume you will set the dimmer attributes of executor 3 to 0 %, by a command.
Press and hold and <<< [GoFastBack] (=Black) Exec 3 Please .
The dimmer values are set to 0 %.
To bring a button executor back in its normal status, press the button executor twice.
To bring a fader executor back in its normal status, move the fader to 0 % and up again.
Related Links
MA Key
<<< [GoFastBack] Key
Change Functions of Executor Buttons
Select Functions of Executor Buttons
To Next Page
Loading...
