© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.64. Temp Command
This page describes the syntax and how to use the Temp command.
To go to the Temp command, press and hold the and Toggle on the console.
Description
With the Temp command you can temporary turn an executor on, as long as you hold the executor button.
The Temp command follows the cue timing, off timing and the position of the executor fader.
If you keep the hands off from the executor button, the executor is off again. The Temp Off command will be
executed.
Syntax
Turn the executor temporary on.
Temp Executor 1
Example
Let´s assume you will temporary turn the executor 1 on, until you keep the hands off.
Press + Toggle (=Temp) and the respective executor button .
The executor is on as long as you hold the key.
Related Links
MA Key
Toggle Key
Executor Bar View
To Next Page
Loading...
