© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.44. Page Command
This page describes the syntax and how to use the page command.
To go to the page command, press Page on the console.
Description
With the page command, you can e.g.
turn off all executors from a page
delete a page
store a page
label a page
Syntax
1. Turn off all executors from a page.
Off Page 1
2. Delete a page.
Delete Page 1
3. Store a new page.
Store Page 2
4. Label a page.
Label Page 1
Example 1
Let´s assume, you will turn off all executor on page 1.
There are two ways to do this:
a) Press Off Page 1 Please .
b) Press Off and tap on page 1 in the page pool.
All executors stored on page 1 are off.
To Next Page
Loading...
