© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
5.66. Update key
Pressing the Update key will store the active programmer values into the current cue.
If you don't specify an executor then it will do it on the main executor.
You can do it on other executors by pressing Update and then one of the keys associated with the executor and
the active running cue you want to update.
If you update an executor that isn't active, then it will update the first cue in that executor.
Related link
Update Command
To Next Page
Loading...
